Car Paint Maintenance - Water Spot Removal, old Wax removal

Following are cheap products that available in household to keep the car paint protected.

To remove water stain, uses acidic liquid

  • Citrix acid
  • Vinegar
To removes oil, grease, or old wax, uses ammonia base liquid
  • Windex - any glass or window cleaner
To removes oil or wax, uses alcohol base liquid:
  • rubbing alcohol - 85% or higher
This helps to prepare the car paint, or car rims/wheels before apply another layer of wax or ceramic coating.

Comments

Post a Comment

Popular posts from this blog

TrueNAS - Immich Installation Issue

Product: Immich Related Product: TrueNAS Overview This post is regarding Immich installation in TrueNAS by using its build-in "Apps" menu. TrueNAS provides OOTB Immich application which can be installed. The installation used existing dataset, which has ACL and username configured.  This leads to subsequent Immich installation failed to create files within the datasets due to user permission issue Error Message Log file: /var/log/app_lifecycle.log Container ix-immich-pgvecto_upgrade-1 service "pgvecto_upgrade" didn't complete successfully: exit 1 Resolution Possible Cause #1: Dataset has ACL enabled.  Therefore Immich installer (Docker) failed to create new directories inside one of the dataset Resolution: 1. Edit the dataset 2. Edit Permission 3. Edit ACL 4. Removes ACL - Clicks on "Strip ACL" button at the end of the screen Possible Cause #2: Dataset has different UNIX user assigned, and not using ACL.  Therefore Immich installer (Docker) failed to c...
Read more

WiFi Data Capturing on 2 Channels - Beginner Guide

Product: Linux Commands: airodump-ng, iw Overview I do not like to use the airmon-ng command to change the WiFi device name to follow its original device name, which it is hard for me to remember, e.g. device name wlp0s12u1. So in this post, I will use "iw" utility (previously called iwlist, iwconfig) that bundled with Fedora 41, or RedHat RHEL 9, to configure the WiFi adapter in monitor mode with my preferred device name.  The benefits are: I can define my own device name, e.g. wlan0mon I can use pre-defined device name in script "iw" utility offers more information in the WiFi network adapter as well as LAN NIC USB device detection is more accurate It can shows device name of my USB WiFi dongle without additional typing It can creates additional logical device that other new users like, such as wifi1, capture2024 Procedure Login to Linux as root, or use one of the following su - sudo su - Find out the physical device ID using "iw dev" command It will dis...
Read more

Honda/Acura: Shift Knob Stuck at Parking Gear

Image
Listing out troubleshooting process when shift knob stuck at P (Parking) gear for Honda or Acura. 1. Press on BRAKE pedal - check whether rear brake light turns on If no light, see Solution 1 2. Check brake fluid - check it has brake fluid If low fluid, see Solution 2 3. Manually press on BRAKE switch above BRAKE pedal - ensure brake light turns on If switch doesn't turn on brake light on pressing, see Solution 3 4. Connects 12V to shift control solenoid to each pin connector (one pin control 1 solenoid) - it looks like below.  If no clicks when the pin touch 12V, see Solution 4 5. Test battery when cranking (starting) car - make sure it is above 11V If low battery, see Solution 5 6. If needs to drive the car immediately, and no time to diagnose the issue, see Solution 6 as temporary workaround Solution 1 - No brake light 1. Replace fuse for the brake light, if fuse burned 2. The brake light fuse control the gear locking solenoid 3. Temporary w...
Read more